DIN 42558 LOCKING PIECES FOR AIR VENT AND OIL DRAIN
Locking pieces are used by welding into the tank to evacuate the air formed in the oil. Available in two different sizes as A6 and A12 locking pieces.
DIN 42554 THERMOMETER POCKETS
Thermometer pockets are used by welding them to the transformer tank. The welded thermometer pockets serve as a housing for the bimetal thermometer and other various products used to measure the temperature of the oil in the transformer. They can be manufactured in different lengths and connection sizes upon request.
DIN 42553 FILLING NOZZLE
This product, which is referred to as filling nozzle, consists of three parts; cap, gasket and socket. the product is used during oil filling by welding G1 1/4″ threaded socket to the tank, then the gasket is installed and the cover is closed.
DIN 42551 OIL DRAIN DEVICES
This product, called oil drain valves, is welded to the transformer tank and it helps to discharge oil. Oil drain valves can be produced in three different sizes according to working conditions.
DIN42551 F CONNECTION PIPES
The connection pipe mechanism is attached to the oil drainage valves welded to the tank, allowing oil to be drained using a mechanism compatible with the specific device in use.
DIN 42548 OIL DRAIN
This product with oil draining device is used for draining residual oil.
